ETRI unveils Time-Sensitive Networking IIoT Gateway based on EdgeX
Guest post written by Geun-Yong Kim, EdgeX Foundry member and Researcher at ETRI
EdgeX Foundry member, ETRI (Electronics and Telecommunications Research Institute) exhibited the EdgeX-based gateway system at the 2018 Photonics Convergence Industry Road Show held in Gwangju, Korea, on November 20- 21, 2018. The Photonics Convergence Industry Road Show is an annual event that companies related to Korean photonics convergence showcase their products and technologies, share best practices and build a stronger network.
< ETRI booth at 2018 Photonics Convergence Industry Road Show >
ETRI’s Time-Sensitive networking IIoT gateway is based on the Go version of the EdgeX framework. It is equipped with hardware that can install a device module with legacy device interface such as RS-232/485, Modbus, etc. It also provides time synchronization accuracy of less than 300ns error for Time-Sensitive Networking, which is a new Ethernet standard that guarantees bounded latency of data transmission.
< ETRI TSN IoT Gateway collecting measured data from BMT Smarteye sensors>
Since BMT gateways collect data sequentially from Smarteye sensors, there was a limit to the data analysis. Therefore, ETRI developed the device that can acquire data from multiple RS485 interfaces at the same time and implemented a new Device Service of EdgeX Foundry to handle it. The ETRI gateway is able to collect 27 kinds of data from BMT Smarteye power measurement sensors. It also collects measured data from three Smarteyes simultaneously per second and the demo included collecting data, exporting data, and rules detecting from data.
Additionally, ETRI developed GUI optimized for EdgeX micro service structure, and users can easily install and delete micro services for gateway by GUI. ETRI has also developed the TSN micro service, rules engine for analyzing power measurement data for TSN networking function, and implemented the GUI to visually express data flow between micro services.
< Micro service management GUI >
< Data collection and graph from BMT Smarteyes >
ETRI will continue researching and developing industrial IoT gateways for the renewable energy industry and power utility sectors based on the EdgeX Foundry framework. For more information, you can email Geun-Yong Kim at firstname.lastname@example.org.
If you have questions or comments, visit the EdgeX Foundry Slack Channel and share your thoughts in the #community channel.